Likes Likes:  0
Results 1 to 10 of 10

Thread: Japanese "Hira Sankaku" Spear Blade Shape

  1. #1
    Join Date
    May 2000
    Location
    Los Angeles, CA USA
    Posts
    2,570
    Likes (received)
    44

    Default Japanese "Hira Sankaku" Spear Blade Shape

    Hi all,

    I was watching the Military Channel this morning and noticed something interesting regarding a segment on the War of 1812 (1812-1815; between the US and Great Britain). A historian showed a bayonet from this period, which I noticed featured an cross section almost identical to that of the typical Japanese spear tip ("hira sankaku" in Japanese). It was a "flat" triangle in shape, consisting of a long side, which was opposed by a raised "V" shape on the other side. The historian said this shape was later banned from production due to the extensive trauma it caused, and that this type of trauma was very hard to repair. He also stated it was necessary to apply counter pressure against the enemy with the foot in order to extract the bayonet ("hikinuki" in Japanese).

    I found it interesting that a European country on the opposite side of Asia from Japan happened to develop a bayonet shape that is basically the same as the Japanese spear blade. There must be something to it I guess.

    Regards,
    Nathan Scott
    Nichigetsukai

    "Put strength into your practice, and avoid conceit. It is easy enough to understand a strategy and guard against it after the matter has already been settled, but the reason an opponent becomes defeated is because they didn't learn of it ahead of time. This is the nature of secret matters. That which is kept hidden is what we call the Flower."

    - Zeami Motokiyo, 1418 (Fūshikaden)

  2. #2
    Join Date
    Jun 2005
    Location
    Quebec
    Posts
    91
    Likes (received)
    0

    Default

    Well like it was said it causes terribly effective wounds. A flat wound will tend to close itself or at least can be artificially closed more or less easily. A triangular one will not close as much and will be a terrible mess to suture. I've been to a boar hunt some weeks ago and triangular arrows were used; I'll skip the gruesome parts but I can attest of the performance of such a design.

  3. #3
    Join Date
    May 2000
    Location
    Los Angeles, CA USA
    Posts
    2,570
    Likes (received)
    44

    Default

    Posted below is a freshly polished hira-sankaku spear tip as seen from the front. It features a bohi (groove) along the widest section, and a single shinogi (ridgeline) separating the shorter sections. This photo came out pretty cool in that you feel like you are just about to eat a spear that is being thrust at your face! Note how the wider bottom side curves upwards at the tip, rather than remaining flat like you might expect:



    The next image is a shot of the mounted blade next to a "su-yari" (plain spear) style saya. The blade is 3.5" long and 3/4" wide, commonly referred to as an "acorn" spear for obvious reasons. The polisher opted for a fancy "stair step" window pattern above the machi, which is more difficult to apply:



    If anyone is curious to see/hear more about this spear, let me know. Otherwise, this is a good example of the triangular spear shape common in many Japanese spears. BTW, this spear tip cuts through paper very easily (the edges are sharpened during polish), leaving a triangular hole (I think technically that qualifies as "tameshigiri" with a spear!)

    Regards,
    Last edited by Nathan Scott; 4th September 2013 at 01:57.
    Nathan Scott
    Nichigetsukai

    "Put strength into your practice, and avoid conceit. It is easy enough to understand a strategy and guard against it after the matter has already been settled, but the reason an opponent becomes defeated is because they didn't learn of it ahead of time. This is the nature of secret matters. That which is kept hidden is what we call the Flower."

    - Zeami Motokiyo, 1418 (Fūshikaden)

  4. #4
    Join Date
    Aug 2013
    Location
    New Jersey, USA
    Posts
    15
    Likes (received)
    5

    Default

    How long is the haft for this spearhead? It looks rather similar to the one I have, which is called an "uchi-e yari." The yarisaki is about 10~11.5 cm. long (I have not measured it precisely) and about 1.5 cm. thick. Evil-looking thing, it will go through just about anything (it evokes thought of AP bullets). The nakago is about 55 cm. long ant the e is about 210 cm. in length. It is made of oak, surrounded by bamboo and wrapped in lacquered paper. The fellow who sold it to me said that the e is almost impossible to break or cut through by a sword (not that I will test that!).

    Anent the triangular shape of the spearhead and the wounds such a form causes, I was at the Jefferson Barracks Civil War Museum in St. Louis this past weekend with and saw a number of bayonets made in the same shape. About 35~40 cm. long, with a concave groove on each face. The thought of being injured by such a weapon is very sobering.

  5. #5
    Join Date
    May 2000
    Location
    Baltimore, MD
    Posts
    520
    Likes (received)
    72

    Default

    Hey Nathan,

    I'm sure there are other collectors out there who would love to know a little more about the blade.
    Christopher Covington

    Daito-ryu aikijujutsu
    Kashima Shinden Jikishinkage-ryu heiho

    All views expressed here are my own and don't necessarily represent the views of the arts I practice, the teachers and people I train with or any dojo I train in.

  6. #6
    Join Date
    May 2000
    Location
    Los Angeles, CA USA
    Posts
    2,570
    Likes (received)
    44

    Default

    O.K., here are a few more photos and details.

    Here is a better shot of the yari blade, which measures: length = 3.5” by width = 3/4”. The blade features: a single ridge line (shinogi) on the top and a single groove (bohi) on the bottom side, which is the widest side; a round neck (kerakubi) with well defined shoulders (machi); and a straight temper line (suhada hamon) that reverses back (kaeri) at the tip (yarisaki) for improved thrusting strength. One thing I noticed is the blade geometry roughly follows the "clamshell edge" (hamaguri-ha) profile concept seen in swords that were designed for penetrating harder objects (armor, etc). Such a shape definitely makes sense for a weapon that is designed to thrust through harder objects (light armor, chain mail, bone, etc). Perhaps this is why the bottom side curves upwards slightly at the tip:



    The tang (nakago) is three-times longer than the blade at 9.5", and is rectangular in shape with three retaining pin holes (mekugi-ana):



    Here is a not-so-great photo of the signature, which comes back to "Suketoshi", a Shin-shinto Period smith (1781-1860):



    Next is an idea of the fittings and haft. The haft (nagaye) is brown red oak (aka-gashi) w/ a black lacquered rectangle pattern, and is fitted for actual combat use (heijo), terminating with an iron pommel (ishizuki) that is of the spear-stand (yari-kake) type. Apparently this type was designed to securely seat the spear into a vertical spear rack. As a side note, vertical spear racks were used for by military applications at places like guard houses and castles, so this type of ishizuki combined with the total length, blade shape, and the understated fittings indicates the spear was likely used to defend some type of place or structure (as opposed to battlefield style or a family heirloom). The blade-mounting section of the haft (tachiuchi) is bound only by a twisted length of hemp cord that is lacquered, and is absent of metal reinforcement fittings (sugjigane) or metal reinforcement collars (dogane).



    The blade mounting section of the haft (Tachiuchi) is 2’-2” long. The haft is 7’-2” long, with a total weapon length of 7’-8”. Neither the haft nor the nakago were cut down, which is very nice, and somewhat hard to find in America due to shipping difficulties.

    The weapon was restored this year with the excellent and highly recommended services of: Mike Virgadamo (saya-shi), Jeff Vassallo ("Kashu" kuro-ishime saya lacquer), and Woody Hall (blade polisher) - with the kind assistance of Mike Yamasaki (sword expert/dealer).

    Regards,
    Last edited by Nathan Scott; 5th September 2013 at 04:03.
    Nathan Scott
    Nichigetsukai

    "Put strength into your practice, and avoid conceit. It is easy enough to understand a strategy and guard against it after the matter has already been settled, but the reason an opponent becomes defeated is because they didn't learn of it ahead of time. This is the nature of secret matters. That which is kept hidden is what we call the Flower."

    - Zeami Motokiyo, 1418 (Fūshikaden)

  7. #7
    Join Date
    May 2000
    Location
    Los Angeles, CA USA
    Posts
    2,570
    Likes (received)
    44

    Default

    Hi Meik,

    Your spear sounds interesting! A 21.5" long nakago is no joke. Is the blade 2-sided or 3-sided?

    I've also seen bayonets with the a very similar triangular profile. The design surely was adopted from spear shapes based on their success.

    Regards,
    Last edited by Nathan Scott; 7th September 2013 at 00:11.
    Nathan Scott
    Nichigetsukai

    "Put strength into your practice, and avoid conceit. It is easy enough to understand a strategy and guard against it after the matter has already been settled, but the reason an opponent becomes defeated is because they didn't learn of it ahead of time. This is the nature of secret matters. That which is kept hidden is what we call the Flower."

    - Zeami Motokiyo, 1418 (Fūshikaden)

  8. #8
    Join Date
    May 2000
    Location
    Baltimore, MD
    Posts
    520
    Likes (received)
    72

    Default

    Great photos Nathan! Thanks for sharing!
    Christopher Covington

    Daito-ryu aikijujutsu
    Kashima Shinden Jikishinkage-ryu heiho

    All views expressed here are my own and don't necessarily represent the views of the arts I practice, the teachers and people I train with or any dojo I train in.

  9. #9
    Join Date
    Aug 2013
    Location
    New Jersey, USA
    Posts
    15
    Likes (received)
    5

    Default

    The yarisaki is triangular, quite similar to the one in the photographs you posted. As far as three-sided spearpoints are concerned, as one of the earlier posts mentioned, wounds of that shape are very difficult to heal. One can only imagine how much more difficult they would have been to treat "back in the day." I am not certain about this, but I think I heard that triangular blades were banned by the Geneva Conventions on Land Warfare. If so, I think I can understand why -- those things are nasty!!

  10. #10
    Join Date
    May 2000
    Location
    Los Angeles, CA USA
    Posts
    2,570
    Likes (received)
    44

    Default

    I think I heard that triangular blades were banned by the Geneva Conventions on Land Warfare
    You know, that sounds familiar to me too. I think I learned that somewhere as well.
    Nathan Scott
    Nichigetsukai

    "Put strength into your practice, and avoid conceit. It is easy enough to understand a strategy and guard against it after the matter has already been settled, but the reason an opponent becomes defeated is because they didn't learn of it ahead of time. This is the nature of secret matters. That which is kept hidden is what we call the Flower."

    - Zeami Motokiyo, 1418 (Fūshikaden)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •